Air Products — PSA/TSA Absorbers — PSA Absorber Vessels (80+ units)

Lmart manufactured PSA Absorber Vessels (80+ units) for Air Products — PSA/TSA Absorbers. Scope: SA516 Gr.70N • ASME / PED • CRN (Canada), DOSH (Malaysia), GOST-R (Russia).

Client	Air Products — PSA/TSA Absorbers
Equipment	PSA Absorber Vessels (80+ units)
Design Code	ASME
Scope	SA516 Gr.70N • ASME / PED • CRN (Canada), DOSH (Malaysia), GOST-R (Russia)

Customer Background

Air Products — PSA/TSA Absorbers is a recognized participant in the industrial gas and specialty chemicals sector. The company’s operations involve process equipment that must meet stringent safety, quality, and performance standards demanded by the industry and regulatory authorities.

This project required PSA Absorber Vessels engineered to ASME standards using SA516 Gr.70, reflecting the technical demands of the application and the client’s commitment to equipment reliability and regulatory compliance.

Challenges and Engineering Requirements

Design for Multiple Operating Conditions

The vessels in this project must withstand the full range of operating conditions specified by the process design: normal operation, startup/shutdown transients, and upset conditions. ASME requires the designer to evaluate each load case and ensure the vessel wall thickness, nozzle reinforcement, and support design are adequate for the governing condition. Where vessels operate under vacuum or external pressure, buckling analysis adds another layer of engineering complexity.

Material Traceability and Quality Documentation

Construction in SA516 Gr.70 requires complete material traceability from the steel mill to the finished vessel. Every plate, forging, pipe fitting, and welding consumable must be traceable to its mill certificate, with chemical composition and mechanical properties verified against the code requirements. The selection of SA516 Gr.70 addresses the corrosion environment specific to industrial gas and specialty chemicals service conditions.

Fabrication Sequence and Workshop Logistics

Producing multiple vessels to ASME standards requires careful production planning. Shell rolling, head forming, nozzle preparation, fit-up, welding, post-weld heat treatment (where required), NDE, and final hydrostatic testing must be sequenced to optimize workshop loading while maintaining material segregation and inspection hold points.

Why Air Products — PSA/TSA Absorbers Selected Lmart

ASME and international certifications. Lmart holds ASME U stamps along with PED, ML (Chinese A-class), and multiple classification society approvals. This breadth of certification means Air Products — PSA/TSA Absorbers can source vessels certified to the applicable code without engaging separate manufacturers for different regulatory jurisdictions.

Heavy fabrication capacity. With workshop crane capacity up to 200 tonnes and the ability to handle vessels up to 6 m diameter, Lmart manufactures equipment ranging from small process vessels to large storage tanks and columns — all within a single facility.

Proven track record with global end users. Lmart has delivered equipment to Air Products — PSA/TSA Absorbers and similar clients in the industrial gas and specialty chemicals sector, demonstrating consistent quality and on-time delivery performance across multiple projects.

Engineering and Manufacturing Solution

Lmart engineered and fabricated PSA Absorber Vessels for Air Products — PSA/TSA Absorbers to ASME using SA516 Gr.70. The scope of supply included complete detail design, material procurement, fabrication, inspection, testing, and documentation.

Key engineering considerations for this project included thermal-hydraulic performance optimization, material selection for the specific process environment, and compliance with ASME requirements for design, fabrication, and inspection.

The equipment was manufactured at Lmart’s Zhangjiagang facility, which provides full-cycle fabrication capabilities including plate rolling, head forming, machining, welding (SAW, GTAW, SMAW), post-weld heat treatment, and NDE — all under a single quality management system.

Quality Control and Project Execution

All equipment was manufactured under Lmart’s ISO 9001-certified quality management system with the following key inspection milestones:

• Material verification: Incoming inspection of all plates, forgings, and fittings against mill certificates; PMI spot checks on alloy materials
• Welding quality: All welding performed by qualified welders using approved WPS/PQR; NDE per ASME requirements including RT/UT on pressure-retaining welds
• Dimensional inspection: In-process dimensional checks at shell rolling, head forming, and final assembly stages
• Pressure testing: Hydrostatic test to ASME requirements, witnessed by the authorized inspector and/or client representative
• Documentation package: Complete data book including material certificates, weld maps, NDE reports, dimensional records, and test certificates

Equipment was delivered to Air Products — PSA/TSA Absorbers’s project site, meeting the project schedule requirements.

Results and Business Impact

Lmart successfully delivered PSA Absorber Vessels to Air Products — PSA/TSA Absorbers, meeting the project’s quality, schedule, and documentation requirements. The equipment was manufactured in SA516 Gr.70 to ASME standards, with full documentation packages accepted by the client and applicable inspection authorities.

This project reinforces Lmart’s position as a qualified manufacturer for industrial gas and specialty chemicals applications, demonstrating the company’s ability to deliver equipment that meets international quality and certification standards.

Customer Voice

“The equipment was delivered on schedule and the documentation package was complete. The quality of fabrication met our inspection requirements.”

— Air Products — PSA/TSA Absorbers project team (paraphrased from project review)

Note: Lmart respects client confidentiality. Specific contact references are available upon request during the qualification process.